CONNER PERIPHERALS, INC.

AT ADAPTER BOARD

Data bus: 16-bit, ISA

Size: Half-length, full-height card

Hard drives supported: Two IDE Interface (AT) drives

Floppy drives supported: None

[Image]

                             CONNECTIONS

                    Function                          Location

  40-pin IDE Interface (AT) connector-internal           CN1

                        USER CONFIGURABLE SETTINGS

               Function                    Location           Setting

  »   Hard drive port address is              JP1               open
      1F0-1F7h

      Hard drive port address is              JP1              closed
      170-177h

  »   Chip Select 1 (CS1) enabled             JP2              closed

      Chip Select 1 (CS1) disabled            JP2               open

  »   IRQ14 is cleared with a status          JP3            pins 2 & 3
      read only                                                closed

      IRQ14 is cleared with                   JP3            pins 1 & 2
      deassertion of Host Slv/Act                              closed